Board Brite II
BOARD BRITE IIis an acid cleaner for cleaning and conditioning tin/lead plated board surfaces. It neutralizes ammonia salt residues from alkaline etchants and removes oxides formed during storage. BOARD BRITE IIcan be used as a pre-cleaner prior to fusing to enhance fusing characteristics. It is effective in both spray and soak applications.
Download Data Sheets
Related products
-
De-Ox™ II
De-Ox II is a de-oxidizer that will remove tin, lead oxides as well as other oxides from contact surfaces minimizing resistance levels and restoring semiconductor test sockets to optimal performance. De-Ox II deoxidizes without “activating” the metal surface therefore subsequent re-growth of oxides is not altered. De-Ox II removes only oxides, and will not attack most metals, except zinc and aluminum. De-Ox II does not attack plastic surfaces in test sockets.
-
Layer Clean™ NP
An acid, non-etching cleaner that provides the most effective removal of chromate conversion coating from copper laminate. LAYER CLEAN NP also removes soils such as fingerprints and oxides. Used prior to photoresist lamination, it reduces imaging defects by improving photoresist adhesion. LAYER CLEAN NP’s non-chelating, non-chloride, phosphate free formula cleans and conditions copper surfaces, and provides consistent high speed cleaning at low concentrations. It is effective in both spray and soak applications.
-
DX™ Strip BAT
Provides additional antitarnish protection while removing fully aqueous liquid photoresists in spray or soak applications. DX STRIP BAT is also effective on aqueous dry film photoresists, and on a combination of liquid and dry film resists being stripped in the same process. It will generally break dry films into particles suitable for filtration. DX STRIP BAT has a low VOC content for reduced air emissions.
