Products

Showing 31–45 of 261 results

  • Placeholder

    Asphaltum Gum

    A multi-purpose gum emulsion for use in the plateroom and pressroom. ASPHALTUM GUM provides superb non-image desensitizing while enhancing ink receptivity of the image area, allowing for quick, clean start-ups. ASPHALTUM GUM also acts as a short term storage gum and is very effective at removing ink and pin dot oxidation.

  • Placeholder

    AUTO WASH™ 140

    This general press wash has a higher flash point than most conventional press washes for a safer working environment. AUTO WASH 140 leaves no oily residue and cuts ink and contaminants quickly and effectively. It is compatible with automatic blanket wash equipment.

  • Placeholder

    AUTO WASH™ 146

    A high flash point press wash that can be used on all types of equipment. AUTO WASH 146 contains a mixture of solvents that provide excellent ink cutting power and components that help remove paper coating and fibers. AUTO WASH 146 is emulsifiable with water to help in the removal of water soluble contaminants.

  • Placeholder

    AUTO WASH™ 265

    A very low VOC press wash designed and tested to be chemically compatible with automatic blanket wash equipment. AUTO WASH 265 contains a blend of chemicals that effectively removes ink and paper contamination while containing no SARA reportables or hazardous air pollutants. AUTO WASH 265 contains no water, but can be mixed with water to aid in rinsing.

  • Placeholder

    AUTO WASH™ 5041

    A high flash point press wash to be used on all types of sheetfed and web press equipment. AUTO WASH 5041 contains a mixture of solvents that provide excellent ink cutting power and components that help remove paper coating and fibers. AUTO WASH 5041 is emulsifiable with water to help in the removal of water soluble contaminants.

  • Placeholder

    AUTO WASH™ 570

    A high flash point/lower VOC press wash to be used on all types of sheetfed and web press equipment. AUTO WASH 570 contains a mixture of solvents that provide excellent ink cutting power and components that help remove paper coating and fibers. This wash is designed to provide a safe alternative to conventional press washes. AUTO WASH 570 is emulsifiable with water to help in the removal of water soluble contaminants.

  • Placeholder

    AUTO WASH™ 6502

    A low VOC non-combustible press wash to be used on all types of sheetfed and web press equipment. AUTO WASH 6502 contains a mixture of solvents that provide excellent ink cutting power and components that help remove paper coating and fibers. AUTO WASH 6502 is emulsifiable with water to help in the removal of water soluble contaminants.

  • Placeholder

    AUTO WASH™ HF

    A high flash point wash designed for use on both UV and conventional inks. AUTO WASH HF contains a blend of chemicals that effectively cleans ink and paper contamination from blankets, rollers, plates and other press parts. This product is effective in automatic equipment as well as by hand. The AUTO WASH HF has a pleasant odor and is an effective environmentally friendly press wash.

  • Placeholder

    BLANKET & ROLLER WASH 5001-06

    An all purpose medium evaporating wash with a low aromatic content for use on both sheetfed and web presses. In one step, BLANKET & ROLLER WASH 5001-6 effectively removes ink and contaminants from rollers and blankets. It does not require a water rinse, but can be used with water to remove paper lint and coating.

  • Placeholder

    BLANKET CONDITIONER

    This industry standard is a deep cleaning rubber conditioner and rejuvenator that lifts and removes hardened ink and embedded pigments in one easy step. It creates a velvety clean surface for excellent sheet release and restores blankets and rollers to like-new condition. BLANKET CONDITIONER is also very effective as a glaze remover.

  • Placeholder

    BOARD BRITE™ II

    BOARD BRITE II is an acid cleaner for cleaning and conditioning tin/lead plated board surfaces. It neutralizes ammonia salt residues from alkaline etchants and removes oxides formed during storage. BOARD BRITE II can be used as a pre-cleaner prior to fusing to enhance fusing characteristics. It is effective in both spray and soak applications.

  • Placeholder

    CA 1171 WASH

    A low VOC press wash to be used on all types of sheetfed press equipment, including both conventional and UV applications. CA 1171 Wash contains a mix of unique ingredients that provide excellent ink cutting power and components that help remove paper coating and fibers. CA 1171 Wash is a stable microemulsion of water and solvents to aid in the removal of water soluble contaminants. This wash will dry effectively and easily mixes with water to leave no residue on the rollers after cleaning.

  • Placeholder

    CAL FREE™

    Effectively removes calcium glazing and build-up from the rollers. CAL FREE is formulated with powerful calcium dissolving chemicals that quickly remove unwanted build up. When used as a general maintenance tool for weekly clean-ups, it will completely eliminate calcium related problems such as ink stripping and poor ink transfer.

  • Placeholder

    CHEMBOND™ 300

    ChemBond 300 is a single step, acidic cleaner and adhesion promoter for inner layers, flex material and rigid laminate prior to resist lamination. It removes oxidation, light organic soil and the chromate conversion coating. ChemBond 300 forms a surface treatment that resists tarnishing and enhances Resist Stripper, eliminating resist lockon. It will not act as a microetch.

  • Placeholder

    ChemBrite™

    ChemBrite™ is a powerful organic solder and tin deoxidizer and brightener. The organic acids in ChemBrite™, combined with other coordinating compounds, give optimum deoxidizing. They are especially important in conditioning printed circuit boards (PCB’s) where the copper etch used is unusually aggressive (which results in a tough oxide film on the solder), or when the solder conditioning time is quite short. Oxides remaining on circuit boards result in a white haze after the board is fused.

    ChemBrite™ is not as corrosive as solder conditioners based on mineral acids, like HCl or HF; this allows a longer lag time between etching and fusing with minimal white haze buildup.

    ChemBrite™ has also been used to clean up tin plating in the lead frame industry, prior to gold plating.

1 2 3 4 5 6 16 17 18