Showing all 10 results
FLO RITE 60 is a unique blend of ingredients for use in a horizontal and vertical hot air leveling process. FLO RITE 60 will remove light copper oxides and lays down a protective layer of flux to protect soldermask and promote good solderability of copper pads. FLO RITE 60 will provide a bright uniform finish with good rinsability. FLO RITE 60 is a solvent free, non-foaming flux that is compatible with LPI and dry film soldermasks.
A chloride-organic acid activated flux designed for maximum performance in vertical hot air leveling machines, where a lower viscosity flux is desired for complete wetting of small holes and surface mount pads. FLO RITE LV provides excellent wetting and even coverage, resulting in a superior solder finish.
LEVELCOTE COVER OIL 300 is formulated for use as a solder blanket oil for horizontal hot air leveling equipment. It prevents the formation of dross by eliminating contact of oxygen to molten solder. When used un a recirculation or oil injection system, LEVELCOTE COVER OIL 300 will lubricate pumps and internal transport mechanisms of horizontal hot air leveling equipment, reducing solder webbing.
LEVELCOTE FLUX 350 is a unique blend of ingredients formulated for use in a horizontal hot air leveling process. It will remove light copper oxides and lays down a protective layer of flux to protect solder mask, and promote good solderability of copper pads. LEVELCOTE FLUX 350 will provide a bright uniform solder finish with good rinseability. LEVELCOTE FLUX 350 is non-foaming and compatible with LPI and dry film solder masks.
A liquid persulfate-based copper microetch that is pre-mixed with sulfuric acid. ME 515L removes copper uniformly, providing good topography for subsequent processing. It can be used wherever a microetch is needed; prior to plating, resist lamination, solder mask over bare copper application, or solder leveling. ME 515L can be used in either soak or spray applications.
A stabilized peroxide product for use with sulfuric acid to form a peroxide/sulfuric microetch. QUANTUM ETCH provides a superior microetch which can be used for inner layer processing, pre-plate cleaning, and cleaning prior to solder leveling. For pre-plate cleaning of panels plated with electroless copper, use the low etch rate operating conditions. QUANTUM ETCH produces a uniformly etched surface, and will maintain a constant desired etch rate over a broad solubility range of copper sulfate in the bath.
For use following hot air leveling or fusing. QUENCH AIDE 96 reduces the temperature of the panels at a steady rate, preventing thermal shock and maintaining a bright, even solder appearance. It is non-foaming and rinses easily with water.
A completely biodegradable concentrate formulated for removing flux residues from printed circuit boards. It effectively removes both ionic and non-ionic surfactants left on fused boards. It also removes processing residues on SMOBC boards when used prior to solder mask application. RINSE AIDE 90 is effective in soak and spray applications.
Formulated for removing insoluble flux residues and ionic contaminants from printed circuit boards following leveling or fusing. RINSE AIDE 95 is designed to be used in spray equipment.
An acid, sprayable cleaner and microetch. SUR CLEAN 92 removes a minute portion of metallic copper in addition to oxides and organic contamination. It can be used for cleaning inner layers, prior to solder mask application for SMOBC, and prior to solder leveling. It is effective in both spray and soak applications.