Maintenance & Cleaning

 

Showing all 14 results

  • Placeholder

    CUPRIC ETCH EQUIPMENT CLEANER

    Provides an effective clean out of Cupric Etcher sumps along with manual removal of deposits on the etch chamber walls. CUPRIC ETCH EQUIPMENT CLEANER will dissolve Dry Film deposits built up between PM’s. CUPRIC ETCH EQUIPMENT CLEANER has a low VOC content for reduced air emissions.

  • Placeholder

    DPC-20 SCREEN CLEANER™

    A safe solvent based material for the removal of uncured printing inks and solder masks. It contains no chlorinated hydrocarbons and no flammable solvents. DPC-20 SCREEN CLEANER is fast acting and has high holding capacity for economy and higher productivity.

  • Placeholder

    E-cleanDF

    An acidic, solvent-based, soluble equipment cleaner designed for use on photoresist developers and strippers. E-cleanDF is exceptionally effective on dry film resists, antifoam residues, hard water scale and carbonate residues. It effectively cleans the residues inside nozzles and pipes.

  • Placeholder

    Equipment Cleaner II™

    Equipment Cleaner IITM removes water hardness, photoresist and soldermask scum and metal salt deposits from chemical processing equipment. Specifically developed for the Printed Circuit Board and Chemical Milling Industries, it will safely clean any spray equipment without damage to any metal or plastic. Equipment Cleaner IITM may be used at any temperature the equipment can safely handle, and may be reused until all the capacity is consumed. Equipment Cleaner IITM is a product that cleans: • Dry film developer residues • Dry film stripper residues • Solder stripper residues • Cleaner residues • Etcher residues (ammoniacal, or cupric) • Soldermask Developer residue • Tin Stripper Iron residue

  • Placeholder

    Equipment Cleaner IV

    Equipment Cleaner IV removes water hardness, photoresist scum and metal salt deposits from chemical processing equipment. Specifically developed for the printed circuit board industry it is very useful in spray equipment causing no damage to metal and plastic parts. Equipment Cleaner IV is odorless.

  • Placeholder

    EV SCREEN CLEANER™

    A wipe-off screen cleaner formulated to rapidly remove inks from printed circuit screens and boards without leaving a residue. EV SCREEN CLEANER has a high evaporation rate to make screens ready for use quickly and without the need for a water rinse.

  • Placeholder

    MAGNASTRIP™ 500

    An alkaline liquid designed to remove fully cured liquid photoimageable acrylic solder masks from printed circuit boards. MAGNASTRIP 500 works quickly without damage to circuitry or laminate. It breaks down the mask so it rinses easily.

  • Placeholder

    MaskStrip™

    MaskStrip is designed to remove uncured UV and thermal solder mask from printed circuit boards and screens. MaskStrip is fully water rinseable and does not affect laminate or metal plating. With proper dilution, rinse waters may not require special treatment. Screening frames and fabrics will not be harmed with this process.

  • Placeholder

    SCREENSOL™ SC-55

    An economical, solvent based screen wash formulated to remove solvent processible inks from printed circuits screens and boards without leaving residue.

  • Placeholder

    SCREENSOL™ SC-560N

    An economical, non-flammable screen wash formulated to remove solvent processible inks from printed circuits screens and boards without leaving residue.

  • Placeholder

    SPECIAL FILM CLEANER

    A pleasant smelling, hexane free film cleaner that removes grease and other soil marks from all types of film, including silver and diazo emulsion imaging films. SPECIAL FILM CLEANER contains a powerful antistatic agent to remove static from non-conductive film and effectively removes tape adhesive marks. Water soluble opaque inks are not affected by SPECIAL FILM CLEANER.

  • Placeholder

    SUMP DOCTOR™

    A liquid concentrate designed to clean and condition resist developing and Resist Stripper machines. It has an increased capability to remove stubborn dye and antifoam residues, and other insoluble materials, along with residues from dry film photoresists and solder masks. A regular maintenance program using SUMP DOCTOR will insure maximum efficiency from equipment, consistent high quality product and minimal downtime.

  • Placeholder

    SUMP PRO

    A non-chelating, acidic equipment cleaner designed for use in developers and resist strippers.
    SUMP PRO is exceptionally effective on resist and antifoam residues, hard water scale, and
    carbonate residues. It contains a penetrating ingredient to enhance its ability to remove
    caked-on residues. Its organic acid formula is effective without generating noxious fumes,
    and is non-chelating for easier waste treatment.

  • Placeholder

    TIDYLINE™ EQ-100

    A concentrated alkaline equipment cleaner designed to clean conveyorized processing equipment. TIDYLINE EQ-100 effectively removes such process foulants as dry film photoresist scum and stains, etchant residue, and hard water scale.