Circutek PC-801
A high speed, electroless copper process which is capable of depositing 80 -100 millionths of copper in 30 minutes. CIRCUTEK PC-801 deposits a dense, adherent copper film on catalyzed surfaces for the production of printed circuitboards.The solution is easy to control and has a broad operating temperature range. The copper produced is a bright pink, fine-grained deposit, which is readily receptive to subsequent copper electrodeposition.
Download Data Sheets
Related products
-
EV Screen Cleaner™
A wipe-off screen cleaner formulated to rapidly remove inks from printed circuit screens and boards without leaving a residue. EV SCREEN CLEANER has a high evaporation rate to make screens ready for use quickly and without the need for a water rinse.
-
Cupric Etching Equipment Cleaner
Provides an effective clean out of Cupric Etcher sumps along with manual removal of deposits on the etch chamber walls. CUPRIC ETCH EQUIPMENT CLEANER will dissolve Dry Film deposits built up between PM’s. CUPRIC ETCH EQUIPMENT CLEANER has a low VOC content for reduced air emissions.
-
Defoamer FE™
Defoamer FETM is a fully organic non-Silicone water-soluble defoamer that rinses readily and leaves no residue. It is designed for systems where clean rinsing is essential. It is odorfree and biodegradable. Defoamer FETM is ideal for defoaming developers or strippers of any type and will work at any pH.