D-4000™ Liquid Developer
A one-part concentrate (40% potassium carbonate) formulated to develop fully aqueous Riston® photopolymer films. D-4000 is economical to use and easy to handle, eliminating the need to weigh and dissolve powdered materials. It is formulated to give optimum results with DuPont™ Riston® films and FoamFREE™ defoamers in conveyorized spray developer equipment.
Download Data Sheets
Related products
-
FlexClean DM™
FlexClean DM is a powerful, non-foaming and free rinsing alkaline cleaner specifically formulated to clean copper on exposed alkalisensitive substrates including polyimide. It will remove oven baked residues, oxidation, fingerprints and oils, all without attack of alkali sensitive substrates or removal of any copper metal. Use of FlexClean DM will leave the copper surface bright, oxidation-free and ready for photoresist application or oxide process. FlexClean DM may be used in conjunction with an acid cleaner, or if required, a light microetch. If a microetch is used, much lower levels of metal are fully acceptable thus minimizing costs and reject rate.
-
ResiStrip™ 5000
ResiStrip 5000 is designed to strip difficult to remove photoresists and LDI films quickly, thoroughly and economically. The stripped board is oxidation-free and ready for oxide or etching.
-
ME 515L
A liquid persulfate-based copper microetch that is pre-mixed with sulfuric acid. ME 515L removes copper uniformly, providing good topography for subsequent processing. It can be used wherever a microetch is needed; prior to plating, resist lamination, solder mask over bare copper application, or solder leveling. ME 515L can be used in either soak or spray applications.
