NPS™10 & 20
A two step, high capacity alternative to peroxide tin/lead stripping. It is especially formulated for intermittent use in whole panel stripping. It can be used in either spray or soak applications without the worry of laminate attack or “run-away” peroxide reactions. NPS 10 is designed to remove the bulk of the tin/lead deposit safely, while leaving behind a thin intermetallic layer that protects the copper from chemical attack. NPS 20 removes the remaining intermetallic layer left after stripping in NPS 10. It works very quickly, with minimal copper attack, and will last 2-3 times as long as NPS 10.
Download Data Sheets
Related products
-
Flo Rite™ LV
A chloride-organic acid activated flux designed for maximum performance in vertical hot air leveling machines, where a lower viscosity flux is desired for complete wetting of small holes and surface mount pads. FLO RITE LV provides excellent wetting and even coverage, resulting in a superior solder finish.
-
Cupric Etching Equipment Cleaner
Provides an effective clean out of Cupric Etcher sumps along with manual removal of deposits on the etch chamber walls. CUPRIC ETCH EQUIPMENT CLEANER will dissolve Dry Film deposits built up between PM’s. CUPRIC ETCH EQUIPMENT CLEANER has a low VOC content for reduced air emissions.
-
DPC-20 Screen Cleaner™
A safe solvent based material for the removal of uncured printing inks and solder masks. It contains no chlorinated hydrocarbons and no flammable solvents. DPC-20 SCREEN CLEANER is fast acting and has high holding capacity for economy and higher productivity.
