ResiStrip™ VI
ResiStrip VI is designed to address the chemical milling industry’s requirements for a fast and cost effective stripper for Copper, Alloy 42, and stainless steel. ResiStrip VI strips thoroughly and quickly, while costing a fraction of conventional proprietary stripping systems. ResiStrip VI leaves copper in a bright, tarnish free condition and will remove any staining of stainless steel from the photoresist. ResiStrip VI gives a small stripped particle size.
Download Data Sheets
Related products
-
Circutek C-777
Low acid activator system used to catalyze non-metallic surfaces for the subsequent metallization by electroless copper. CIRCUTEK C-777is primarily used in the fabrication of printed circuit boards but can also be used in any application where the metallization of a non-conductor is desired.A pre-dip solution is necessary to pre condition the substrate and to minimize drag-in of water into the CIRCUTEK C-777. Make up the pre-dip solution according to instructions below, or use CIRCUITEK PD-776 liquid.CIRCUTEK PD-776Sis also used in the preparation of CIRCUTEK C-777.
-
ME 515L
A liquid persulfate-based copper microetch that is pre-mixed with sulfuric acid. ME 515L removes copper uniformly, providing good topography for subsequent processing. It can be used wherever a microetch is needed; prior to plating, resist lamination, solder mask over bare copper application, or solder leveling. ME 515L can be used in either soak or spray applications.
-
ADF-35
Formulated to remove fully aqueous dry films and screen ink resists from inner layers in spray applications. ADF-35will produce large particles for easy filtration, with less dissolved resist for prolonged bath life. It contains antitarnish agents to maintain a bright uniform copper appearance. It has very low levels of ingredients classified as VOCs, and when used as directed is exempt from SCAQMDregulation.
