Solder Conditioner II™
Solder Conditioner IITMis a concentrated solutionformulated to clean tin and tin/lead deposits on printed circuit boards. Solder Conditioner IITMremoves oxides caused by copper etchants but will not etch copper or tin/lead deposits. Printed circuit boards treated with Solder Conditioner IITMhave exceptional solderability and will reflow readily.Treated boards may go directly to reflow or into immersion tin prior to reflow. Solder Conditioner IITMcan replace immersion tin in certain applications.
Download Data Sheets
Related products
-
ADF-35
Formulated to remove fully aqueous dry films and screen ink resists from inner layers in spray applications. ADF-35will produce large particles for easy filtration, with less dissolved resist for prolonged bath life. It contains antitarnish agents to maintain a bright uniform copper appearance. It has very low levels of ingredients classified as VOCs, and when used as directed is exempt from SCAQMDregulation.
-
DX™45
A one-part concentrate (45% potassium carbonate) formulated to develop fully aqueous dry film photoresists and photoimageable solder masks. DX-45’s highly concentrated formula is ideally suited for use in feed and bleed systems, resulting in less frequent additions than with more dilute carbonate solutions. Proprietary ingredients enhance loading, help keep equipment clean, and ensure straighter sidewalls, cleaning the foot” of underdeveloped resist. These features result in greater productivity and less down time. “” one-part concentrate (45% potassium carbonate) formulated to develop fully aqueous dry film photore”
-
D-4000™ Liquid Developer
A one-part concentrate (40% potassium carbonate) formulated to develop fully aqueous Riston® photopolymer films. D-4000 is economical to use and easy to handle, eliminating the need to weigh and dissolve powdered materials. It is formulated to give optimum results with DuPont™ Riston® films and FoamFREE™ defoamers in conveyorized spray developer equipment.
